User Tools

Site Tools


project:member:vacuum_former

Vacuum forming machine

Introduction

This project was started some time ago, and has been recently restarted. The design is now smaller and simpler.

Project Team

Project Members: Jack Rose

Project Plan

Create 'base' that provides the vacuum surface - Done

Create a 'heating box' that is 600mm x 600mm with a height of around 1000mm. Interior walls need to be coated with aluminium foil, and a stand of some sort is needed for the heater at the bottom. This box needs to be easily disassembled for storage.

Create a frame to hold the plastic in place.

Write up some documentation so it can be set up and used easily.

project/member/vacuum_former.txt · Last modified: 2015/04/16 20:08 by projectgus